dyp/pas/uFrame_59R_AOI.pas

unit uFrame_59R_AOI;

interface

uses
  System.SysUtils, System.Types, System.UITypes, System.Classes, System.Variants, 
  FMX.Types, FMX.Graphics, FMX.Controls, FMX.Forms, FMX.Dialogs, FMX.StdCtrls,
  System.ImageList, FMX.ImgList, FMX.Controls.Presentation, FMX.Edit,
  FMX.Objects,uFrameBase,uShowInfo,uKsoap,uPucFun;

type
  TFrame_59R_AOI = class(TFrameBase)
    Rectangle88: TRectangle;
    Option1: TRectangle;
    Glyph9: TGlyph;
    OptionLabel1: TText;
    Text19: TText;
    Edit_CaiZhi: TEdit;
    Option2: TRectangle;
    Glyph2: TGlyph;
    OptionLabel3: TText;
    Text6: TText;
    Edit_banhou: TEdit;
    Option3: TRectangle;
    Glyph3: TGlyph;
    OptionLabel5: TText;
    Text23: TText;
    Edit_jiexi: TEdit;
    Option4: TRectangle;
    Glyph12: TGlyph;
    OptionLabel7: TText;
    Text28: TText;
    Edit_xiankuang: TEdit;
    Option7: TRectangle;
    Glyph13: TGlyph;
    OptionLabel9: TText;
    Text30: TText;
    Edit_rongchadada: TEdit;
    ImageList1: TImageList;
    Option6: TRectangle;
    Glyph1: TGlyph;
    Text1: TText;
    Text2: TText;
    Edit_rongchaxiao: TEdit;
    Option5: TRectangle;
    Glyph4: TGlyph;
    Text3: TText;
    Text4: TText;
    Edit_jianju: TEdit;
    TxtError: TText;
    procedure Edit_CaiZhiClick(Sender: TObject);
  private
    { Private declarations }
  public
     procedure FillDefaultValue(sPartnumValue,sDefaultTxt:string);override; //填写默认值
     function DoExec():boolean;override;  //判断输入是否有效,执行插入主表,或打开窗体
     function CheckValid(var sTxt:string):boolean;override;
  end;

implementation

{$R *.fmx}

uses uDM;

function TFrame_59R_AOI.CheckValid(var sTxt:string):boolean; //返回面次数据
var
   aa:Extended;
begin
   Result:=false;
   if not GetRadioTxt(sTxt) then  //没有选择,提示出错信息
   begin
       ErrorLayout(GridLayout,TxtError,'请选择TOP面/BOT面');
       Exit;
   end;
   if Trim(Edit_CaiZhi.Text)='' then begin Error(Edit_CaiZhi,TxtError,'材質輸入不能為空');Exit;end;
   if Trim(Edit_banhou.Text)='' then begin Error(Edit_banhou,TxtError,'板厚輸入不能為空');Exit;end;
   if Trim(Edit_jiexi.Text)='' then begin Error(Edit_jiexi,TxtError,'解析度輸入不能為空');Exit;end;
   if Trim(Edit_xiankuang.Text)='' then begin Error(Edit_xiankuang,TxtError,'最小线宽輸入不能為空');Exit;end;
   if Trim(Edit_jianju.Text)='' then begin Error(Edit_jianju,TxtError,'最小间距輸入不能為空');Exit;end;
   if Trim(Edit_rongchaxiao.Text)='' then begin Error(Edit_rongchaxiao,TxtError,'线宽容差最小值輸入不能為空');Exit;end;
   if Trim(Edit_rongchadada.Text)='' then begin Error(Edit_rongchadada,TxtError,'线宽容差最大值輸入不能為空');Exit;end;

   if not TryStrToFloat(Edit_banhou.Text,aa) then begin Error(Edit_banhou,TxtError,'板厚輸入類型錯誤，請重新輸入。');Exit;end;
   if not TryStrToFloat(Edit_jiexi.Text,aa) then begin Error(Edit_jiexi,TxtError,'解析度輸入類型錯誤，請重新輸入。');Exit;end;
   if not TryStrToFloat(Edit_xiankuang.Text,aa) then begin Error(Edit_xiankuang,TxtError,'最小线宽輸入類型錯誤，請重新輸入。');Exit;end;
   if not TryStrToFloat(Edit_jianju.Text,aa) then begin Error(Edit_jianju,TxtError,'最小间距輸入類型錯誤，請重新輸入。');Exit;end;
   if not TryStrToFloat(Edit_rongchaxiao.Text,aa) then begin Error(Edit_rongchaxiao,TxtError,'线宽容差最小值輸入類型錯誤，請重新輸入。');Exit;end;
   if not TryStrToFloat(Edit_rongchadada.Text,aa) then begin Error(Edit_rongchadada,TxtError,'线宽容差最大值輸入類型錯誤，請重新輸入。');Exit;end;
   Result:=true;
   if Result then Error(Edit_CaiZhi,TxtError,'');
end;

procedure TFrame_59R_AOI.FillDefaultValue(sPartnumValue,sDefaultTxt:string);
var
   tmpList:TStrings;
begin
   if sDefaultTxt='' then Exit;
   tmpList:=TStringList.Create;
   try
       tmpList.DelimitedText:=sDefaultTxt;
       if tmpList.Count>32 then
       begin
          Edit_CaiZhi.Text:=tmpList.Strings[32];
          Edit_banhou.Text:=tmpList.Strings[0];
          Edit_jiexi.Text:=tmpList.Strings[3];
          Edit_xiankuang.Text:=tmpList.Strings[4];
          Edit_jianju.Text:=tmpList.Strings[5];
          Edit_rongchaxiao.Text:=tmpList.Strings[20];
          Edit_rongchadada.Text:=tmpList.Strings[21];
       end;

       {tmpList.DelimitedText:=sPartnumValue;
       if tmpList.Count>5 then                 //这里根据料号返回信息填写缺省值
          Edit_banhou.Text:=tmpList.Strings[5];}

   finally
       tmpList.Free;
   end;
end;

function TFrame_59R_AOI.DoExec():boolean;
var
    LotNoRecord:TLotNoRecord;
    vId:Integer;
    sTxt:string;
    sError:string;
    vP_ID:Double;
begin
    Result:=false;
    if CheckValid(sTxt) then  //上传数据
    begin
       LotNoRecord:=TLotNoRecord.Create('-1');  //初始化记录
       LotNoRecord.P_LOT:=ksoap.P_Lot;
       LotNoRecord.P_LOT_TYPE:='正常板';
       LotNoRecord.P_Enable:='Y';
       LotNoRecord.P_ID:=0;
       LotNoRecord.P_ORG_CODE:=ksoap.P_ORG_CODE;       //廠區
       LotNoRecord.P_NUM:=ksoap.P_WORK_NUM;            //工號
       LotNoRecord.P_PC:=ksoap.P_PC;            //製程
       LotNoRecord.P_LINE:=ksoap.P_LINE;         //線別
       LotNoRecord.P_LINE_NUM:=ksoap.P_LINE_NUM;     //線別編號
       LotNoRecord.P_DIE_NAME:=Edit_CaiZhi.Text;       //材質
       LotNoRecord.P_LINE_SPEED:=StrToFloat(Edit_banhou.Text);     //板厚
       LotNoRecord.P_ELE_CUR_DENSITY:=StrToFloat(Edit_jiexi.Text);    //解析度
       LotNoRecord.P_ELE_AREA1:=StrToFloat(Edit_xiankuang.Text);          //最小線寬
       LotNoRecord.P_SIDE:=sTxt;               //面次
       LotNoRecord.P_PRODUCT_PRESSURE:=StrToFloat(Edit_rongchadada.Text);   //線寬容差最大值
       LotNoRecord.P_COM_TEMPERATURE:=StrToFloat(Edit_rongchaxiao.Text);    //線寬容差最小值
       LotNoRecord.P_ELE_AREA2:=StrToFloat(Edit_jianju.Text);          //最小間距
       LotNoRecord.P_CREATION_DATE:=FormatDateTime('yyyymmdd hh:mm:ss',Now);

       sError:='';
       vP_ID:=Ksoap.Thread_cf_traceability_seq_f(ksoap.P_ORG_CODE,sError);
       LotNoRecord.P_ID:=vP_ID;
       if vP_ID=0 then
       BEGIN
           dm.InsertMain(vId,LotNoRecord,true);
           ShowInfoOK('連接數據庫服務器失敗數據暫存本地,正在生產中...');
           Result:=true;
       END
       ELSE
       BEGIN
           //直接调用API,出错再保存本地
           if not Ksoap.Thread_Insert_CM_WIP_PROCESS_LINE_HISTORY_NEW(LotNoRecord,sError) then  //提交主表不成功
           begin
              if sError='連接數據庫服務器失败' then
              begin
                 dm.InsertMain(vId,LotNoRecord,true);
                 ShowInfoOK('連接數據庫服務器失敗數據暫存本地,正在生產中...');
                 Result:=true;
              end
              else
                 ShowError(sError);
           end
           else
           begin
               ShowInfoOK('上傳成功,正在生產中...');
               Result:=true;
           end;
       END;
    end;
end;


procedure TFrame_59R_AOI.Edit_CaiZhiClick(Sender: TObject);
begin
  inherited;
  ShowTouchKeyBoard();
end;

end.